Pc part picking help
KraftZone Server: mc.kraftzone.tk

=====================================================

Author Topic: Pc part picking help  (Read 5864 times)

BrandonPKC

  • Full Member
  • ***
  • Posts: 117
    • View Profile
Pc part picking help
« on: February 25, 2013, 03:01:02 am »
So I'm trying to build a pc under $400. I have parts picked, but I want some opinions on what I can do to improve it.

PSU- Cooler Master eXtreme Power Plus 500w Power Supply (RS500-PCARD3-US)   $37.99
RAM- Kingston Technology HyperX Blu 4GB 1600MHz DDR3 Non-ECC CL9 DIMM (Kit of 2) XMP KHX1600C9D3B1K2/4GX  $35.99
APU-AMD A10-5800K APU 3.8Ghz Processor AD580KWOHJBOX  ( im tryna save money, so im not getting a gpu just yet.) $127.29
MotherBoard- MSI Socket FM2/AMD A75/DDR3/SATA3&USB3.0/A&GbE/MicroATX Motherboard FM2-A75MA-E35  $59.99
Case- NZXT Technologies Source 210 Computer Case (White)  $39.99
Monitor- ASUS VS197D-P 18.5-Inch HD LCD Monitor  $89.99

I already have a 500GB HDD and a dvd rw drive, so I didn't include them.
The price totals up to $375.73 (including shipping)
« Last Edit: March 02, 2013, 01:04:59 am by BrandonPKC »

Koolio

  • Administrator
  • Hero Member
  • *****
  • Posts: 2073
    • View Profile
Re: Pc part picking help
« Reply #1 on: February 25, 2013, 07:53:02 am »
you should put the prices of each component into the list.. would help see where the budget is going.

from the looks of it though, looks pretty good for the price.

jesison2

  • Newbie
  • *
  • Posts: 16
    • View Profile
Re: Pc part picking help
« Reply #2 on: February 25, 2013, 08:29:20 am »
Heres another build you could try for a bit over $400
Case : Cooler Master Elite 431 http://www.newegg.com/Product/Product.aspx?Item=N82E16811119256 $54.99
CPU: AMD FX-4100 Zambezi 3.6GHz (3.8GHz Turbo) Socket AM3+  http://www.newegg.com/Product/Product.aspx?Item=N82E16819103996 $104.99
Motherboard: GIGABYTE GA-970A-D3 AM3+ AMD 970 SATA 6Gb/s USB 3.0 ATX AMD Motherboard  http://www.newegg.com/Product/Product.aspx?Item=N82E16813128521 $89.99
RAM: CORSAIR Vengeance 4GB 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMZ4GX3M1A1600C9 http://www.newegg.com/Product/Product.aspx?Item=N82E16820233141 $27.99
PSU: CORSAIR Builder Series CX500 500W ATX12V v2.3 80 PLUS BRONZE Certified Active PFC Power Supply http://www.newegg.com/Product/Product.aspx?Item=N82E16817139027&Tpk=Corsair%20CX500 $49.99
Monitor: ASUS VS Series VS197D-P Black 18.5" 5ms LED Backlight Widescreen LCD Monitor 250 cd/m2 ASCR 50000000:1 http://www.newegg.com/Product/Product.aspx?Item=N82E16824236204&Tpk=ASUS%20VS197D-P $89.99

Grand Total=$417.94

A bit more expensive than your build but you can run a full atx motherboard instead of a micro atx which will give you more options and better upgrading choices in the future. No use running an APU if you were gonna get a gpu as well but  if you wanted a really cheap video card maybe a DIAMOND 6450PE31GSB AMD Radeon HD 6450 1GB GDDR3 SDRAM PCI Express x16 Video Card http://www.newegg.com/Product/Product.aspx?Item=N82E16814103227 $45.99.
« Last Edit: February 25, 2013, 08:33:25 am by jesison2 »

RedArrow

  • Hero Member
  • *****
  • Posts: 660
  • Yes, it is me!!!
    • View Profile
Re: Pc part picking help
« Reply #3 on: February 25, 2013, 02:18:27 pm »
Well, not that I know much about motherboards and stuff, but since jesison2 made something above 400 dollars, it is too expensive as Brandon tries to build a pc under $400... :D
Cigarettes are like squirrels. They're perfectly harmless until you put one in your mouth and light it on fire.

Never apologize, you are already too late when you want to.

-Ex Registered
-Ex Member
-Ex Member+
-Ex Voter+
-Ex FeatherClub
-Ex Architect
-Ex Staff
-Ex Support
-Currently Donator

jp123loz

  • Full Member
  • ***
  • Posts: 156
    • View Profile
Re: Pc part picking help
« Reply #4 on: February 25, 2013, 02:58:46 pm »
I feel so poor and noobish when it comes to hardware and pc building

CopyableCougar4

  • Sr. Member
  • ****
  • Posts: 276
  • The One and Only
    • View Profile
Re: Pc part picking help
« Reply #5 on: February 25, 2013, 08:30:55 pm »
I found a build-your-own pc kit. It's a little pricey($481 on sale w/o monitor), but it has 8gb ram, 500gb hard drive, and a quad-core processor.
http://www.cpusolutions.com/store/pc/AM3+-FX-4100-Quad-Core-3-6GHz-Customizable-DIY-PC-176p3241.htm. From the link you can also click customize and choose some less pricey options to put it in your budget, but from what I can see on the site, this PC is pretty nice for a little under $500.
~Copy

jesison2

  • Newbie
  • *
  • Posts: 16
    • View Profile
Re: Pc part picking help
« Reply #6 on: February 26, 2013, 02:58:47 am »
My build was only $17 above brandons budget not muchhh

Koolio

  • Administrator
  • Hero Member
  • *****
  • Posts: 2073
    • View Profile
Re: Pc part picking help
« Reply #7 on: February 26, 2013, 12:48:21 pm »
If you aren't in a rush to buy, then I wouldn't buy, just wait it out longer and try get some more money to put towards it, look out for bargain deals on parts and see what is possible to build around it at the time.

Personally I think trying to squeeze in a lcd display is tough for the budget, but if you are, then I'd probably go with trying to get a better display even if its refurbished lcd. As outside of gaming and the need to get an lcd with low response time like 5ms and below you will want a decent screen with a resolution that is better for when you got money to upgrade some components ( 1920x1080 being the ideal)

Really a balance and compromise, but I'd try to get at least in something that can be utilized in the long run.

Also if you go with the APU-AMD A10-5800K  and going to be using the apu on it for a while until you get dedicated graphics card, then its def worth trying to get slighty faster memory like...

$32.99
Crucial Ballistix 4GB 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) Desktop Memory Model BLT4G3D1869DT1TX0
http://www.newegg.com/Product/Product.aspx?Item=N82E16820148557&nm_mc=AFC-C8Junction&cm_sp=&AID=10446076&PID=3938566&SID=

As the cpu/apu will be using system memory, and having your system memory at ddr1600 (at minimum) and above will result in squeezing out some better fps performance..

Anyway here is my build..
http://pcpartpicker.com/p/G6fD

CPU
$130
6core AMD FX-6300 .. good cpu performance for a bit of future proofing (its also 95wat )
http://www.newegg.com/Product/Product.aspx?Item=N82E16819113286&nm_mc=AFC-C8Junction&cm_sp=&AID=10446076&PID=3938566&SID=

Graphics
-----
$96.99
R7770-PMD1GD5 AMD Radeon HD 7770 GHz Edition 1024MB GDDR5 PCIe 3.0 x16 Video Card
http://www.microcenter.com/product/403019/R7770-PMD1GD5_AMD_Radeon_HD_7770_GHz_Edition_1024MB_GDDR5_PCIe_30_x16_Video_Card

Memory
------
$27.99
CORSAIR Vengeance 4GB 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMZ4GX3M1A1600C9B
http://www.newegg.com/Product/Product.aspx?Item=N82E16820145346&nm_mc=AFC-C8Junction&cm_sp=&AID=10446076&PID=3938566&SID=


etc

And the rest in the link.. http://pcpartpicker.com/p/G6fD

Base Total: $444.16    
Promo Discounts: -$10.00    
Mail-in Rebates: -$45.00    
Total: $389.16    ( supposedly )

  (though I honestly wouldn't buy it without checking everything would actually all work together as I stick with nvidia and intel myself and not familiar with the amd/motherboard side of things )


Without an lcd screen though, but I already said I think would be better to save up some more.


also saw this...

http://www.newegg.com/Product/Product.aspx?Item=N82E16814130600&nm_mc=AFC-C8Junction&cm_sp=&AID=10446076&PID=3938566&SID=
460gtx at $80 is a v.good deal not to mention it beats the amd/ati equivalents at those range of prices.. its also nvidia so you got better driver support not only for games but also production software.

« Last Edit: February 26, 2013, 12:50:08 pm by Koolio »

BrandonPKC

  • Full Member
  • ***
  • Posts: 117
    • View Profile
Re: Pc part picking help
« Reply #8 on: March 02, 2013, 01:08:04 am »
Heres another build you could try for a bit over $400
Case : Cooler Master Elite 431 [url=http://www.newegg.com/Product/Product.aspx?

The problem with that is, theres not any good cable management.